BIOHAZARD SAFETY CABINET SERIES:
SUMMARY OF USAGE:
Biological safety cabinets are applied in microorganism, biology engine and some place which have rigorous requirement to working environment. This kind of cabinets can prevent efficiently pathogenic microorganism , microorganism, genes and etc. from diffusing. Also the cabinets can obstruct the contamination to operator from these materials. So the cabinets can supply non-bacteria and non-dust working condition for treatment, medical producing and science research.
n Fission structure: The front panels are detachable and easier to remove for filter and filter.
n Visible window: with anti-ultraviolet toughened glass and the height of glass can be adjustable. If the height is higher than safe level, the audible and visual alarm will be opened.
n The cabinet: all be manufactured by 304# stainless steel material and the left, right and back bins of cabinet are manufactured together with arc angle will make easier to clean the side of cabinet.
n Contaminated Pressure Plenum: Negative Unitized drain pan beneath the work surface allows best arm position above the user's lap.
n The airflow design creates a more impenetrable air barrier or momentum air curtain at the front of the cabinet, increasing the cabinet's protective capabilities and avoiding cross infection.
n This kind of design standard is comply with NSF49 II standard. With strong wind from the draught intake in side of cabinet, which will clear the round airflow up in lateral cabinet and prohibit the moving of contamination.
n Ultra-high efficiency filter system: input and output of air will be filtrated by ULPA filter and its efficiency is more than 99.999%. the pressure sensor will watch the working condition of filter from time to time and alarm the operator if the pressure is over the setting value.
n Ultraviolet light safety: the UV light cannot be opened when the fan, visible window and fluorescent light are running.
n Interlock function for two fans(blower and exhaust fan): when the exhaust fan stops, the blower will sop automatically and alarm device will begin to work. When the blower stops, the exhaust fan will continue to work and the alarm system will indicate the fault of blower.
DISPLAYING DATA IN THE SCREEN:
n air-exhaust value(m3/h)
n the velocity of air laminar flow (m/s)
n counter for exhaust fan
n counter for blower
SAFETY CONTROL SYSTEM:
n alarm for low air exhaust value
n alarm for low air-velocity of down laminar flow
n alarm for fault of exhaust fan
n alarm for closing condition of visible window
n when the visible window is opened, the UV light will be closed automatically
n when the fluorescent light is on working, the UV light will be closed automatically
n when the blower begin to work and then the UV light will be off after air laminar flow is created.
n The blower will be off automatically if the exhaust fan happens some trouble. The exhaust fan will increased his rotate speed automatically in order to keep the working space in negative pressure inside cabinet in case something wrong happens with the blower.
n Microprocessor will counteract the gradually increased resistance in filter. It will keep air inflow and downflow in normal condition under any conditions.
Model: BSC-1300 II A2(not use for medicine)
Suitable for two person
Inflow airflow velocities: 0.5m/s
Down airflow velocities: 0.35m/s
Safety: Personal protection: All: CFU10, Not all: CFU5
Product protection: CFU5
Overlapping pollution: CFU2
Vibration/half peak: 0.5um
Power supplu/consumption: AC220V/50Hz/500W
Working zone: 1340*600*680
Overall DIM.: 1500*810*1540
Size of wind sending filter: 1340*530*70*
Size of wind exhaust filter: 700*480*90*
Size of light lamp and UV lamp: 40W*/30W*